| Gage
Block Holders |
Part
Number |
Measuring Range, mm |
Weight (kg) |
Quick adjusting gage block holders for use with precision gage blocks are hand made to
ensure burr free side and fixing surfaces. The rack pattern locating grooves provide rapid
adjustment and prevent the gage block combination from slipping or moving once in
position.The clamping slide
and gage block combination are both secured using the same thumb screw located on the
clamping slide. |
KOB-GB2101
KOB-GB2102
KOB-GB2103
KOB-GB2105
KOB-GB2106
KOB-GB2104
KOB-GB2116
KOB-GB2109
KOB-GB2117
KOB-GB2112
KOB-GB2113
KOB-GB2114
KOB-GB2115
KOB-GB2118 |
0-50
0-100
0-200
100-200
100-300
0-300
200-400
300-500
400-600
500-800
800-1000
1000-1200
1300-1500
1800-2000 |
0.2
0.3
0.4
0.4
0.5
0.5
0.6
0.7
0.8
1.0
1.2
1.4
1.6
1.8 |
|
Measuring
Jaws
with cylindrical shoulder for inside or outside measurement |
Part
Number |
Nomical Sizes (dia. of shoulder of 1 pair of Jaws / Maximum gage depth |
Weight (kg) |
 |
KOB-GB2204
KOB-GB2210
KOB-GB2216
KOB-GB2220
KOB-GB2230
KOB-GB2240 |
4mm / 8mm
10mm / 15mm
16mm / 20mm
20mm / 40mm
30mm / 65mmm
40mm / 95mm |
0.03
0.05
0.07
0.10
0.20
0.35 |
|
Control
Points
KOB-GB2330 (pair) |
|
Scriber
Point
KOB-GB-2322 (steel)
KOB-GB2322H (carbide) |
|
 |
For
checking graduations and exact distances between points and lines. |
 |
Use with
gage blocks, holder and base to form an accurate height gage. |
|
Center
Point
KOB-GB2321 |
|
|
|
 |
Use with
gage blocks and holder to form a marking compass |
|
|
|
| Knife Edge Jaws |
Part Number |
Max. Diameter / Overall Length |
Weight (kg) |
 |
KOB-GB2310
KOB-GB2311
KOB-GB2312
KOB-GB2313 |
26mm / 55mm
50mm / 65mm
100mm / 90mm
200mm / 140mm |
0.07
0.08
0.18
0.38 |
|
| Parallel Jaws |
Part Number |
Dimensions (HxWxL) |
Weight / pair (kg) |
 |
KOB-GB2301
KOB-GB2302 For outside
measurements only. |
20x9x100mm
20x9x125mm |
0.18
0.23 |
|
| Parallel
Jaws |
Part
Number |
Dimensions (HxWxL) |
Weight / pair (kg) |
 |
KOB-GB2304
KOB-GB2305For inside or
outside measurements (not for internal diameter) |
20x9x100mm
20x9x125mm |
0.20
0.24 |
|
Clamping
Stand
KOB-GB2350 |
|
Grip
KOB-GB1907 |
|
 |
Simple and
efficient handling avoiding hand temperature. Measuring range 0-100mm, in combination with
micrometer check sets 1010M / 1010MP / 1011MA / 1011MB / 1011MC. |
 |
Convenient
and easy handling of gage blocks for 0.5mm up. Insulated against the transfer of body
heat. Gripping force can be adjusted for the greater weight of large gage blocks. |
|
Gage
Block Clamps
KOB-GB1908 |
|
Universal
Gage Block Holder
KOB-GB1909 |
|
 |
For gage
blocks over 100mm |
 |
For
individual gage block combinations over 100mm |
|
Gage
Block Accessory Set
KOB-GB2010M |
|
|
|
 |
1 pair
measuring jaws
1 pair measuring jaws
1 scriber point
1 center point
1 base
1 gage block holder
1 gage block holder
1 gage block holder |
4mm, total
10mm, total
--
--
--
0-50mm
0-10mm
100-200MM |
|
|
Gage
Block Accessory Set
KOB-GB2023M |
|
|
|
 |
1 pair
measuring jaws
1 pair measuring jaws
1 pair measuring jaws
1 pair measuring jaws
1 pair measuring jaws
1 pair measuring jaws
1 pair parallel jaws
1 pair knive edge jaws
1 scriber point
1 center point
1 base
1 gage block holder
1 gage block holder
1 gage block holder
1 gage block holder |
4mm, total
10mm, total
16mm, total
20mm, total
30mm, total
40mm, total
100mm
26mm
--
--
--
0-50mm
0-100mm
100-200mm
200-400mm |
|
|
Gage
Block Accessory Set
KOB-GB2004M (photo not available) |
|
Gage
Block Accessory Set
KOB-2014M (photo not available) |
|
1 pair
measuring jaws
1 gage block holder
1 gage block |
4mm, total
0-300mm
300-500mm |
1 pair
measuring jaws
1 pair measuring jaws
1 pair measuring jaws
1 pair measuring jaws
1 scriber point
1 center point
1 base
1 gage block holder
1 gage block holder
1 gage block holder |
4mm, total
10mm, total
16mm, total
20mm, total
--
--
--
0-50mm
0-100mm
100-200mm |
|
|
|
|
| Contact us for more
accessories or additional information |
