Gage Blocks Sets, Ceramic
Ceramic gage block sets come in wooden cases lined with a special rust preventing fabric in both the bottom and the lid. The storage insert is screwed in and can be easily removed for cleaning. Extra slots provide storage for additional 1mm or 2mm carbide wear protectors.
Technical Data
| Density: | 6.05 g/cm3 |
| Total porosity: | 0% |
| Hardness: | 1350HV |
| Compressive strength: | 2100 N/mm2 |
| Bending strength: | 800 N/mm2 |
| Modulus of elasticity: | 205.000 N/mm2 |
| Thermal conductivity: | 2.3 W/mK |
| Coefficient of thermal expansion: | (10±1) x 10-6 K-1 |
Ceramic Gage Block Sets
| Part Number | Standard Measuring Range | Smallest Step, mm | Number of Gage Blocks | Contents, dimensions in mm | Weight, kg. | KOB-GB1122MK | 3-270mm | 0.0005 | 122 | 1.005 (1 pc) 1.001, 1.002, 1.003 to 1.009 (9 pcs) 1.01, 1.02, 1.03 to 1.49 (49 pcs) 0.5, 1, 1.5, 1.6, 1.7, 1.8, 1.9 (7 pcs) 2, 2.5, 3 to 25 (47 pcs) 30, 40, 50, 60, 70 (5 pcs) 75, 80, 90, 100 (4 pcs) | 4.2 |
| KOB-GB1112MK | 3-225mm | 0.0005 | 112 | 1.0005 (1 pc) 1.001, 1.002, 1.003 to 1.009 (9 pcs) 1.01, 1.02, 1.03 to 1.49 (49 pcs) 0.5, 1, 1.5, 2 to 24.5 (49 pcs) 25, 50, 75, 100 (4 pcs) | 3.8 |
| KOB-GB1103MK | 2-225mm | 0.005 | 103 | 1.005 (1 pc) 1.01, 1.02, 1.03 to 1.49 (49 pcs) 0.5, 1, 1.5, 2 to 24.5 (49 pcs) 25, 50, 75, 100 (4 pcs) | 3.8 |
| KOB-GB1087MK | 2-270mm | 0.001 | 87 | 1.001, 1.002, 1.003 to 1.009 (9 pcs) 1.01, 1.02, 1.03 to 1.49 (49 pcs) 0.5, 1, 1.5, 2 to 9.5 (19 pcs) 10, 20, 30 to 100 (10 pcs) | 3.0 |
| KOB-GB1088MK | 3-270mm | 0.005 | 88 | 1.0005 (1 pc) 1.001, 1.002, 1.003 to 1.009 (9 pcs) 1.01, 1.02, 1.03 to 1.49 (49 pcs) 0.5, 1, 1.5, 2 to 9.5 (19 pcs) 10, 20, 30 to 100 (10 pcs) | 3.0 |
| KOB-GB1076MK | 2-225mm | 0.005 | 73 | 1.005 (1 pc) 1.01, 1.02, 1.03 to 1.49 (49 pcs) 0.5, 1, 1.5, 2 to 9.5 (19 pcs) 10, 20, 30, 40, 50 (5 pcs) 75, 100 (2 pcs) | 2.5 |
| KOB-GB1047MaK | 3-225mm | 0.005 | 47 | 1.005 (1 pc) 1.01, 1.02, 1.03 to 1.09 (9 pcs) 1.1, 1.2, 1.3 to 1.09 (9 pcs) 1, 2, 3 to 24 (24 pcs) 25, 50, 75, 100 (4 pcs) | 2.6 |
| KOB-GB1047MbK | 3-270mm | 0.005 | 47 | 1.005 (1 pc) 1.01, 1.02, 1.03 to 1.09 (19 pcs) 1.2, 1.3, 1.4 to 1.9 (8 pcs) 1, 2, 3 to 9 (9 pcs) 10, 20, 30 to 100 (10 pcs) | 2.6 |
| KOB-GB1046MK | 3-270mm | 0.001 | 46 | 1.001, 1.002,1.003 to 1.009 (9 pcs) 1.01, 1.02, 1.03 to 1.09 (9 pcs) 1.1, 1.2, 1.3 to 1.9 (9 pcs) 1, 2, 3 to 9 (9 pcs) 10, 20, 30 to 100 (10 pcs) | 2.6 |
| KOB-GB1032MK | 3-100mm | 0.005 | 323 | 1.005 (1 pc) 1.01, 1.02, 1.03 to 1.09 (9 pcs) 1.1, 1.2, 1.3 to 1.9 (9 pcs) 1, 2, 3 to 9 (9 pcs) 10, 20, 30, 50 (4 pcs) | 1.2 |
Individual Gage Blocks
Individual gage blocks are available in the following configurations:
| From - Up To, mm | Graduation, mm | Material |
| 0.1-0.49 | 0.01 | H |
| 0.5-0.99 | 0.01 | S, H |
| 0.5-0.95 | 0.05 | K |
| 1.0 | - | S, H, K |
| 1.0005 | - | S, H, K |
| 1.001-1.009 | 0.001 | S, H, K |
| 1.01-1.49 | 0.01 | S, H, K |
| 1.5-1.9 | 0.1 | S, H, K |
| 2.0-25 | 0.5 | S, H, K |
| 30-100 | 10.0 | S, H, K |
| S = available in steel H = available in carbide K = available in ceramic Other sizes are available on request | ||
| Nominal Size | Material |
| 125 | S, Kb |
| 150 | S, Kb |
| 175 | S, Kb |
| 200 | S, Kb |
| 250 | S, Kb |
| 300 | S, Kb |
| 400 | S, Kb |
| 500 | S, Kb |
| 600 | S |
| 700 | S |
| 800 | S |
| 900 | S |
| 1000 | S |
| S = available in steelKb = available with ceramic tipsOther sizes available on request | |
Gage blocks over 100mm are manufactured with clamping holes at both ends for use with gage block clamps, which may be used in conjunction with holders from other manufacturers.
Applicable SIC Codes: 3423, 3545, 5049, 5084 Applicable NAICS Codes: 332212, 333515, 423490, 423830