Gage Blocks Sets, Carbide
Ceramic gage block sets come in wooden cases lined with a special rust preventing paper in both the bottom and the lid. The storage insert is screwed in and be easily removed for cleaning. Extra slots provide storage for additional 1mm or 2mm carbide wear protectors. All gage blocks are also available individually - contact us for pricing and availability.
Carbide gage blocks
- are mainly used as wear guards for ceramic or steel gage blocks
- are used in workshops and toolrooms under severe wear and abrasion conditions
- have a coefficient of thermal expansion of 4.6 x 10-6 K-1
| Part Number | Standard Measuring Range | Smallest Step, mm | Number of Gage Blocks | Contents, dimensions in mm | Weight, kg. |
| KOB-GB1103MHM | 2-225mm | 0.005 | 103 | 1.005 (1 pc) 1.01, 1.02, 1.03 to 1.49 (49 pcs) 0.5, 1, 1.5, 2 to 24.5 (49 pcs) 25, 50, 75, 100 (4 pcs) | 3.8 |
| KOB-GB1087MHM | 2-270mm | 0.001 | 87 | 1.001, 1.002, 1.003 to 1.009 (9 pcs) 1.01, 1.02, 1.03 to 1.49 (49 pcs) 0.5, 1, 1.5, 2 to 9.5 (19 pcs) 10, 20, 30 to 100 (10 pcs) | 3.0 |
| KOB-GB1047MaHM | 3-225mm | 0.005 | 47 | 1.005 (1 pc) 1.01, 1.02, 1.03 to 1.09 (9 pcs) 1.1, 1.2, 1.3 to 1.9 (9 pcs) 1, 2, 3 to 24 (24 pcs) 25, 50, 75, 100 (4 pcs) | 2.6 |
| KOB-GB1047MbHM | 3-270mm | 0.005 | 47 | 1.005 (1 pc) 1.01, 1.02, 1.03 to 1.19 (9 pcs) 1.2, 1.3, 1.4 to 1.9 (9 pcs) 1, 2, 3 to 24 (24 pcs) 25, 50, 75, 100 (4 pcs) | 2.6 |
| KOB-GB1046MHM | 3-100mm | 0.001 | 46 | 1.001, 1.002, 1.003 to 1.009 (9 pcs) 1.01, 1.02, 1.03 to 1.09 (9 pcs) 1.1, 1.2, 1.3 to 1.9 (9 pcs) 1, 2, 3 to 9 (9 pcs) 10, 20, 30 to 100 (10 pcs) | 2.6 |
| KOB-GB1032MHM | 3-100mm | 0.005 | 323 | 1.005 (1 pc) 1.01, 1.02, 1.03 to 1.09 ( 9 pcs) 1.1, 1.2, 1.3 to 1.9 (9 pcs) 1, 2, 3 to 9 (9 pcs) 10, 20, 30 50 (4 pcs) | 1.2 |
| KOB-GB1010MHM | 0-25 | -- | 10 | 2.5, 5.1, 7.7 10.3, 12.9, 15, 17.6, 20.2, 22.8, 26 (1 pc/each) | 1.0 |
| KOB-GB1013MHM | 0-100mm | -- | 13 | 2.5, 5.1, 7.7, 10.3, 12.9, 15, 17.6, 20.2, 22.8, 25, 50, 75, 100 (1 pc/each) | 1.5 |
| The nominal sizes states are in accordance with VDI/VDEDGQ 2618 | |||||
Individual Gage Blocks
Individual gage blocks are available in the following configurations:
| From - Up To, mm | Graduation, mm | Material |
| 0.1-0.49 | 0.01 | H |
| 0.5-0.99 | 0.01 | S, H |
| 0.5-0.95 | 0.05 | K |
| 1.0 | - | S, H, K |
| 1.0005 | - | S, H, K |
| 1.001-1.009 | 0.001 | S, H, K |
| 1.01-1.49 | 0.01 | S, H, K |
| 1.5-1.9 | 0.1 | S, H, K |
| 2.0-25 | 0.5 | S, H, K |
| 30-100 | 10.0 | S, H, K |
| S = available in steel H = available in carbide K = available in ceramic Other sizes are available on request | ||
| Nominal Size | Material |
| 125 | S, Kb |
| 150 | S, Kb |
| 175 | S, Kb |
| 200 | S, Kb |
| 250 | S, Kb |
| 300 | S, Kb |
| 400 | S, Kb |
| 500 | S, Kb |
| 600 | S |
| 700 | S |
| 800 | S |
| 900 | S |
| 1000 | S |
| S = available in steelKb = available with ceramic tipsOther sizes available on request | |
Gage blocks over 100mm are manufactured with clamping holes at both ends for use with gage block clamps, which may be used in conjunction with holders from other manufacturers.
Applicable SIC Codes: 3423, 3545, 5049, 5084 Applicable NAICS Codes: 332212, 333515, 423490, 423830